Delcam News

Delcam opens North-West office to increase sales

Thu, 23 May 2013 00:00:00 GMT

Delcam has opened an office in Liverpool to support increased sales in the North-West of the UK, especially to the region�s aerospace industry.

Delcam France to host free seminar on machining with robots with KUKA

Thu, 23 May 2013 00:00:00 GMT

Delcam France will hold a free seminar on machining with robots in association with robot manufacturer KUKA at the KUKA site at Villebon-sur-Yvette, near Paris, on 7th June.

Delcam CRISPIN's new project management system at Shoes & Leather Guangzhou

Wed, 22 May 2013 00:00:00 GMT

Delcam CRISPIN will launch project management and collaboration software for the footwear industry at the Shoes & Leather Guangzhou exhibition to be held in Guangzhou, China, from 29th to 31st May.

Delcam to show electrode solution at Intermold Thailand

Wed, 22 May 2013 00:00:00 GMT

Delcam Thailand will demonstrate Delcam�s completely integrated solution for the design, machining and inspection of electrodes at the Intermold Thailand exhibition to be held in Bangkok from 20th to 23rd June.

Delcam to show latest CAM programming software in Moscow

Tue, 21 May 2013 00:00:00 GMT

Delcam will demonstrate the latest developments in its complete range of CAM software at the Metalloobrabotka exhibition to be held in Moscow from 27th to 31st May.

Delcam to show latest machining and inspection software at PTC Live

Mon, 20 May 2013 00:00:00 GMT

Delcam will demonstrate the latest developments in its machining and inspection software at the PTC Live Global event to be held in Anaheim, California, from 9th to 12th June.

Delcam's new ArtCAM JewelSmith for complex jewellery design at JCK Las Vegas

Fri, 17 May 2013 00:00:00 GMT

Delcam will demonstrate the latest version of its ArtCAM JewelSmith software for the design and manufacture of rings, broaches, cufflinks and other jewellery at JCK exhibition to be held in Las Vegas from 31st May to 3rd June.

Delcam's PowerMILL CAM gives Rimstock speed, quality and flexibility

Thu, 16 May 2013 00:00:00 GMT

Using Delcam�s PowerMILL CAM software has helped wheel manufacturer, Rimstock, boost its production to over 350,000 wheels per year, while maintaining the company�s reputation for high quality and rapid delivery times.

Delcam India organises update meeting for PowerMILL users in Pune

Wed, 15 May 2013 00:00:00 GMT

Delcam India recently held its latest update training session for customers in Pune using the PowerMILL CAM software for high-speed and five-axis machining.

Delcam webinar on efficient electrode manufacture

Wed, 15 May 2013 00:00:00 GMT

Delcam will host two webinars on the efficient design and manufacture of electrodes on 23rd May.

Delcam's PowerINSPECT 2013 offers dual-device inspection

Tue, 14 May 2013 00:00:00 GMT

The 2013 release of Delcam�s PowerINSPECT inspection software offers unique dual-device inspection options that allow measurement with two portable devices at the same time.

Delcam's PartMaker to host monthly webinars on advanced manufacturing

Tue, 14 May 2013 00:00:00 GMT

Delcam�s PartMaker Division will launch a new, monthly webinar series for manufacturing professionals on 31st May with a webinar on "High-Speed Machining�.

Delcam's latest technology to be shown by SEACAM at Feira Feimafe 2013

Fri, 10 May 2013 00:00:00 GMT

The latest CADCAM technology from Delcam will be demonstrated on stand B49 at the Feira Feimafe by SEACAM, Delcam�s longstanding reseller in Brazil.

Delcam Indonesia to show latest CAM developments at MTT Expo

Thu, 9 May 2013 00:00:00 GMT

Delcam Indonesia will demonstrate the latest developments in Delcam�s complete range of CAM software at the MTT Indonesia Expo to be held in Jakarta from 22nd to 25th May.

Delcam expands North American support team

Wed, 8 May 2013 00:00:00 GMT

Delcam is pleased to announce a further expansion of its North American support resources with the addition of Cory Medina to the post-sales support team in Salt Lake City.

Delcam graduate mentors Young Enterprise project at Small Heath School

Wed, 8 May 2013 00:00:00 GMT

Throughout the current academic year, Delcam has supported a group of students from Small Heath School close to its Birmingham headquarters as part of the Young Enterprise Company Programme.

Delcam's PowerINSPECT on multiple devices at Control

Tue, 7 May 2013 00:00:00 GMT

Delcam�s PowerINSPECT inspection software will be demonstrated on a range of devices, including portable arms, a laser tracker and a machine tool, on stand 3514 in Hall 3 at the Control exhibition to be held from 14th to17th May in Stuttgart.

Delcam announces programme for 2013 Orthotics Technology Forum

Fri, 3 May 2013 00:00:00 GMT

The full programme has now been finalised for the 2013 Orthotics Technology Forum, which will be held at the Georgia Institute of Technology in Atlanta from 29th to 31st May, 2013.

Delcam hosts successful COMET robot machining seminar

Fri, 3 May 2013 00:00:00 GMT

As part of its dissemination activities, the COMET project is hosting four technical seminars throughout Europe describing recent progress in its work on machining with robots.

Delcam to focus on five-axis developments at Advanced Manufacturing

Thu, 2 May 2013 00:00:00 GMT

Delcam will highlight its latest developments for the programming of five-axis machines at Advanced Manufacturing event to be held at the NEC, Birmingham, from 4th to 6th June.

Delcam to highlight feature-based programming at GTMA event at Mazak

Wed, 1 May 2013 00:00:00 GMT

Delcam will highlight the benefits of feature-based programming with its FeatureCAM software at the GTMA�s Manufacturing UK event to be held at Mazak�s European Headquarters in Worcester on 9th May.

Delcam's new PartMaker offers improved multi-axis milling

Wed, 1 May 2013 00:00:00 GMT

Delcam�s PartMaker Division has released PartMaker 2013 R2, which features much improved four- and five-axis simultaneous milling strategies.

Europe's largest mouldmaker specifies Delcam software for tooling manufacture

Tue, 30 Apr 2013 00:00:00 GMT

The Simoldes Group, Europe�s largest mouldmaking company, has standardised on Delcam�s PowerSHAPE CAD software and PowerMILL CAM for the manufacture of its tooling.

Delcam Malaysia to show latest CAM developments at METALTECH

Tue, 30 Apr 2013 00:00:00 GMT

Delcam Malaysia will demonstrate the latest developments in Delcam�s complete range of CAM software at the METALTECH exhibition to be held in Kuala Lumpur from 21st to 25th May.

Delcam to show electrode solution at Amerimold

Mon, 29 Apr 2013 00:00:00 GMT

Delcam will demonstrate its completely integrated solution for the design, machining and inspection of electrodes at the Amerimold exhibition to be held in Rosemont, Illinois, on 12th and 13th June.

Delcam announces ArtCAM JewelSmith Award for jewellery design

Mon, 29 Apr 2013 00:00:00 GMT

Delcam is pleased to announce that Kecily Yu Jou Hung was the winner of the 2013 ArtCAM JewelSmith Award.

Delcam's aerospace software and services on show at Paris Air Show

Fri, 26 Apr 2013 00:00:00 GMT

Delcam will promote its wide range of software and services for the aerospace manufacturing and MRO industries on the Midlands Aerospace Alliance stand at the Paris Air Show to be held from 17th to 23rd June.

Delcam Australia to show latest CAM developments at AUSTEC

Fri, 26 Apr 2013 00:00:00 GMT

Delcam Australia will demonstrate the latest developments in Delcam�s complete range of CAM software at the TIMTOS exhibition to be held in Melbourne from 7th to 10th May.

Delcam launches PowerMILL Robot Interface

Wed, 24 Apr 2013 00:00:00 GMT

Delcam has launched the PowerMILL Robot Interface for the programming of robots for multi-axis machining operations.

Delcam's new ArtCAM Pro for woodworking on show at LIGNA

Tue, 23 Apr 2013 00:00:00 GMT

Delcam will demonstrate the latest version of its ArtCAM Pro software for design and manufacturing of signs, furniture and other woodworking products at the LIGNA exhibition to be held in Hannover from 6^th to 10^th May.

Delcam CRISPIN to show shoe design software at Indonesian footwear expo

Mon, 22 Apr 2013 00:00:00 GMT

Delcam CRISPIN will demonstrate the 2013 versions of its ShoeMaker software for 3D concept design of all types of footwear and its Engineer Pro programs for pattern development and grading at the Indoleather & Footwear Expo to be held in Jakarta, Indonesia, from 2nd to 5th May.

Delcam to show robot machining at Natural Stone Show

Thu, 11 Apr 2013 00:00:00 GMT

Delcam will demonstrate the latest advances in the use of robots for machining at the Natural Stone Show to be held at the ExCel, London, from 30th April to 2nd May.

Delcam to launch new PowerINSPECT in China at CIMT seminar

Thu, 11 Apr 2013 00:00:00 GMT

Delcam will launch the 2013 version of its PowerINSPECT inspection software in China with a free half-day seminar on 25th April during the CIMT exhibition in Beijing.

Delcam helps American Mold Builders Association to 'Push the Boundaries'

Wed, 10 Apr 2013 00:00:00 GMT

Delcam will support the 'Push the Boundaries' theme adopted for the 2013 AMBA Convention, to be held from April 24th to 26th at the Renaissance Hotel and Convention Center, Schaumburg, Illinois.

Delcam's new ArtCAM Pro for complex artistic designs on show at Sign & Digital

Wed, 10 Apr 2013 00:00:00 GMT

Delcam will demonstrate the latest version of its ArtCAM Pro software for design and manufacturing of 3D signage at the Sign & Digital exhibition to be held at the NEC, Birmingham, from 30th April to 2nd May.

Delcam FeatureCAM turning and turn-mill options on show at EASTEC

Tue, 9 Apr 2013 00:00:00 GMT

The latest developments for the programming of turning and turn-mill equipment in Delcam�s FeatureCAM feature-based CAM software will be demonstrated on booth #5326 at the EASTEC 2013 exhibition to be held from May 14th to 16th in West Springfield, Massachusetts.

Delcam PowerMILL used for turbo milling demonstrations at Hermle Open House

Tue, 9 Apr 2013 00:00:00 GMT

Delcam�s PowerMILL software for five-axis machining is being used to program a novel machining method for the creation of "fir-tree� profiles in components for turbo machinery.

Delcam joins Coventry Manufacturing Technology Centre

Mon, 8 Apr 2013 00:00:00 GMT

Birmingham-based CADCAM software developer Delcam has become a member of the flagship Manufacturing Technology Centre (MTC) in Coventry.

Delcam to show PowerSHAPE solid modelling and point cloud tools at Develop3D Live

Mon, 8 Apr 2013 00:00:00 GMT

Delcam will demonstrate the 2013 R2 version of its PowerSHAPE CAD software family at the Develop3D Live 2013 conference at Warwick University on 16th April.

Delcam FeatureCAM turning and turn-mill options on show at Turning Days

Fri, 5 Apr 2013 00:00:00 GMT

The latest developments for the programming of turning and turn-mill equipment in Delcam�s FeatureCAM feature-based CAM software will be demonstrated at the Turning Days exhibition to be held in Villingen-Schwenningen, Germany, from 17th to 20th April.

Delcam CRISPIN to show shoe design software at Chinese footwear expo

Thu, 4 Apr 2013 00:00:00 GMT

Delcam CRISPIN will demonstrate the 2013 version of its ShoeMaker software for 3D concept design and Engineer Pro pattern development and grading software for the footwear industry at the 15th Jiniang Footwear Expo to be held in Fujian, China, from 18th to 21st April.

Delcam's CADCAM software boosts orthotics production at Salts Techstep

Wed, 3 Apr 2013 00:00:00 GMT

Using Delcam�s CADCAM software to design and manufacture its custom orthotic insoles has allowed Salts Techstep to increase dramatically the number of devices that the company can produce.

Delcam's Vortex high-speed roughing headed for China

Wed, 3 Apr 2013 00:00:00 GMT

Delcam will demonstrate its new Vortex strategy for high-speed area clearance at the CIMT exhibition in Beijing from 22nd to 27th April.

Delcam Japan to show electrode solution at Intermold

Thu, 28 Mar 2013 00:00:00 GMT

Delcam Japan will demonstrate Delcam�s completely integrated solution for the design, machining and inspection of electrodes at the Intermold exhibition to be held in Tokyo from 17th to 20th April.

HaasTech 2013 - Delcam to demonstrate feature-based CAM at Haas anniversary

Wed, 27 Mar 2013 00:00:00 GMT

Delcam will join the celebrations of the 30th anniversary of Haas Automation at HaasTec 2013 at the company�s California headquarters from 9th to 12th April.

Delcam announces record sales and profits in 2012

Tue, 26 Mar 2013 00:00:00 GMT

Birmingham-based CADCAM developer Delcam has announced that the company achieved record annual sales of �47.

Delcam to launch PowerINSPECT 2013 with free seminar

Mon, 25 Mar 2013 00:00:00 GMT

Delcam will launch the 2013 version of its PowerINSPECT inspection software with a free half-day seminar at its Birmingham headquarters on 23rd April.

Delcam to show new dental milling software for Datron and DDL in USA

Fri, 22 Mar 2013 00:00:00 GMT

Delcam will show the new dedicated versions of its DentMILL dental milling software tailored specifically for the production of dental restorations on the Datron D5 and Digital Dental Lab desktop machining systems at the Lab Day East event in New York on 6th April.

Delcam PowerSHAPE new solid modelling and point cloud tools at RAPID

Fri, 22 Mar 2013 00:00:00 GMT

Delcam will demonstrate new tools and enhancements for solid modelling and for manipulating point clouds in its PowerSHAPE CAD software family at the SME�s RAPID exhibition to be held in Pittsburgh from 10th to 13th June.

Delcam's FeatureCAM supports sophistication at Sutter Instruments

Thu, 21 Mar 2013 00:00:00 GMT

A combination of Delcam�s FeatureCAM feature-based CAM system and the integrated CAM software, Delcam for SolidWorks, helps the Sutter Instrument Company to manufacture some of the world�s most sophisticated research and inspection equipment.

Delcam to highlight five-axis developments at EASTEC

Wed, 20 Mar 2013 00:00:00 GMT

Delcam will highlight its latest developments for the programming of five-axis machines at EASTEC 2013 to be held in West Springfield, Massachusetts from 14th to 16th May.

Delcam to show latest in feature-based programming at Northwest Machine Tool show

Wed, 20 Mar 2013 00:00:00 GMT

Delcam will demonstrate the latest version of its FeatureCAM feature-based CAM software at the Northwest Machine Tool show to be held on 27th and 28th March at the Oregon Convention Center in Portland, Oregon.

Delcam to show latest in feature-based programming at Advanced Manufacturing Show

Tue, 19 Mar 2013 00:00:00 GMT

Delcam will demonstrate the latest version of its FeatureCAM feature-based CAM software at the Advanced Manufacturing Show to be held at the NEC, Birmingham, from 4th to 6th June.

Delcam to feature robot machining and portable inspection at Industrie

Mon, 18 Mar 2013 00:00:00 GMT

Delcam France will highlight the latest developments in machining with robots and in portable inspection at the Industrie exhibition to be held in Lyon, France, from 16th to 19th April.

Delcam to show orthotics CADCAM software and scanner at BAPO conference

Fri, 15 Mar 2013 00:00:00 GMT

Delcam will demonstrate the latest versions of its software for the design and manufacture of custom orthotic insoles, plus its iQube foot scanner for the collection of patient data, at the British Association of Prosthetists and Orthotists Annual Conference to be held in Telford from 22nd to 24th March.

Korean student wins first Delcam international CAM competition

Fri, 15 Mar 2013 00:00:00 GMT

Jang-U Shim, from Chonbuk Mechanical & Technical High School in Korea, was the winner of Delcam�s first international student CAM competition, which was held at the company�s Birmingham headquarters earlier this year.

Delcam supports Ontario machine-tool suppliers at Joint Open House

Thu, 14 Mar 2013 00:00:00 GMT

Delcam will support the leading machine-tool distributors in Ontario � DMG Canada, Elliott Matsuura, Ferro Technique, SST and EMEC � at their annual Joint Open House event in the Greater Toronto area on 24th and 25th April.

Delcam Thailand holds On-Machine Verification event with Mazak and Renishaw

Wed, 13 Mar 2013 00:00:00 GMT

Delcam Thailand held a successful two-day event promoting On-Machine Verification (OMV) to local Bangkok manufacturers on 7th and 8th March.

Delcam to sponsor ISTMA international toolmaking conference

Tue, 12 Mar 2013 00:00:00 GMT

Delcam is to sponsor the opening dinner of the 14th World Conference of the International Special Tooling & Machining Association (ISTMA) at the Tortworth Court Hotel, Wotton-under-Edge.

Delcam launches new joint venture in Mexico during Ministerial visit

Mon, 11 Mar 2013 00:00:00 GMT

Delcam has formed a new joint venture in Mexico, Delcam Mexico, to promote faster growth in sales of the company�s CADCAM software in the country.

Delcam to preview new design module for millable pressovers at IDS

Fri, 8 Mar 2013 00:00:00 GMT

Delcam will preview new options for the design and manufacture of pressovers in its range of CADCAM software for the dental industry on booth K040 � L041 in Hall 3.

Delcam's latest CAM developments on show in Singapore

Thu, 7 Mar 2013 00:00:00 GMT

Delcam will demonstrate the latest developments in its complete range of CAM software in partnership with Shonan Design at the MTA Singapore exhibition to be held from 9th to 12th April.

Delcam to show new 5-axis options in PartMaker at EASTEC

Wed, 6 Mar 2013 00:00:00 GMT

Delcam�s PartMaker Division will demonstrate the latest version of PartMaker CAM software for programming CNC mills, lathes, wire EDM equipment, turn-mill centres and Swiss-type lathes at EASTEC 2013 to be held in West Springfield, Massachusetts from 14th to 16th May.

Delcam to show new orthotic CAD software at PAC

Tue, 5 Mar 2013 00:00:00 GMT

Delcam will demonstrate the latest versions of its CAD software for the design and manufacture of custom orthotic insoles, plus its market leading iQube mini foot scanner for the collection of patient data, at the 2013 PAC Symposium: Turning Research Into Clinical Pearls held at Le Westin Montreal Quebec Friday, April 5 - Saturday, April 6, 2013.

Delcam CADCAM software chosen to drive monster 5-axis machining centre

Mon, 4 Mar 2013 00:00:00 GMT

Delcam�s PowerSHAPE design software and PowerMILL CAM system have been chosen by MonsterCAM to drive one of the UK�s largest independently-owned, continuous five-axis machining centres.

Delcam Taiwan plans demos with 22 partners at TIMTOS

Mon, 4 Mar 2013 00:00:00 GMT

Programs produced by Delcam Taiwan with Delcam�s CAM software will be demonstrated on 22 machine tool partner stands at the TIMTOS exhibition to be held in Taipei, Taiwan, from 5th to 10th March, with many of the partners showing a variety of parts machined with more than one of the Delcam systems.

Delcam demonstrates robot machining to Nick Clegg and Vince Cable

Fri, 1 Mar 2013 00:00:00 GMT

Delcam demonstrated the latest developments in its PowerMILL software for the programming of machining by robots at the Manufacturing Summit held by the UK Department for Business, Innovation and Skills at the Heritage Motor Centre in Gaydon on 28th February.

Orthotics Technology Forum moves to USA for 2013

Thu, 28 Feb 2013 00:00:00 GMT

As the only orthotic event dedicated to new technologies the 2013 edition of the Orthotics Technology Forum will break new ground in scan, design, machining and materials.

Delcam to launch dual-device inspection software at Control

Tue, 26 Feb 2013 00:00:00 GMT

Delcam will launch the 2013 release of its PowerINSPECT inspection software on stand 3514 at the Control exhibition to be held in Stuttgart, Germany, from 14th to 17th May.

Delcam upgrades PartMaker Modeling

Mon, 25 Feb 2013 00:00:00 GMT

Delcam�s PartMaker Division has released PartMaker Modeling 2013, the new version of its 3D CAD for CAM application that provides users with the ability to create 3D solid models from scratch as well as to repair and modify 3D engineering data of any origin.

Delcam to launch dedicated dental milling software for Datron and DDL at IDS

Fri, 22 Feb 2013 00:00:00 GMT

At the IDS exhibition to be held in Cologne, Germany, from 12th to 16th March, Delcam will launch dedicated versions of its DentMILL dental milling software tailored specifically for the production of dental restorations on the Datron D5 and Digital Dental Lab desktop machining systems.

Hankook Delcam to have biggest CAM booth at Intermold Korea

Thu, 21 Feb 2013 00:00:00 GMT

Delcam�s Joint Venture Partner in Korea, Hankook Delcam, will reinforce its position as the leading supplier of CAM software in the country on its largest-ever booth at the Intermold Korea exhibition to be held in Ilsan from 12th to 16th March.

Delcam's latest FeatureCAM includes new stock model options

Wed, 20 Feb 2013 00:00:00 GMT

The 2013 R2 version of Delcam�s FeatureCAM feature-based CAM software incorporates a number of new stock model options that allow users to increase productivity, improve surface finish and reduce tool wear.

Delcam CRISPIN to show footwear design software in Istanbul

Tue, 19 Feb 2013 00:00:00 GMT

Delcam Turkey will demonstrate the 2013 versions of Delcam CRISPIN�s ShoeMaker software for 3D concept design and the Engineer Pro pattern development and grading software at the AYSAF (Istanbul International Footwear Suppliers Fair) to be held from 28th February to 2nd March.

Delcam to host robot machining seminar to demonstrate COMET project success

Mon, 18 Feb 2013 00:00:00 GMT

COMET project partners will be hosting free seminars on machining with robots throughout Europe to communicate their results and findings, and also to demonstrate Delcam�s newly developed PowerMILL Robot Interface software.

Delcam's latest PartMaker CAM on show at Houstex

Mon, 18 Feb 2013 00:00:00 GMT

Delcam will demonstrate the 2013 version of its PartMaker CAM software for programming CNC mills, lathes, Wire EDM equipment, turn-mill centres and Swiss-type lathes on booth 1234 at the Houstex exhibition to be held in Houston from 26th to 28th February.

Delcam Italia to show electrode solution at EuroStampi

Fri, 15 Feb 2013 00:00:00 GMT

Delcam Italia will demonstrate Delcam�s completely integrated solution for the design, machining and inspection of electrodes at the EuroStampi exhibition to be held in Parma from 21st to 23rd March as part of the MECSPE group of exhibitions.

Delcam Taiwan to show latest CAM developments at TIMTOS

Thu, 14 Feb 2013 00:00:00 GMT

Delcam Taiwan will demonstrate the latest developments in Delcam�s complete range of CAM software at the TIMTOS exhibition to be held in Taipei from 5th to 10th March.

Delcam's ArtCAM used for large-scale carvings for modest budgets

Thu, 14 Feb 2013 00:00:00 GMT

By using Delcam�s ArtCAM artistic CADCAM software to drive a CNC router, Joe Valasek�s company, Carveture, can produce carved artwork and architectural pieces that were in the past only accessible to very rich individuals and organisations.

Delcam's PartMaker 2013 to be displayed at PMTS

Wed, 13 Feb 2013 00:00:00 GMT

The PartMaker Division of Delcam will demonstrate its latest version of the PartMaker CAM software for programming CNC mills, lathes, wire EDM equipment, turn-mill centres and Swiss-type lathes, including the new Advanced Surface Machining module, on booth #733 at PMTS, the precision machining industry�s leading trade show, in Columbus, Ohio, from 16th to 18th April.

Delcam to show latest in dental CADCAM at Dentistry Show

Tue, 12 Feb 2013 00:00:00 GMT

Delcam will demonstrate the latest versions of its DentCAD and DentMILL CADCAM programs at the Dentistry Show to be held at the NEC, Birmingham, on 1st and 2nd March.

Delcam Australia moves to new offices

Tue, 12 Feb 2013 00:00:00 GMT

Delcam Australia, the local subsidiary of leading CADCAM developer, Delcam, celebrated its move to new offices in Melbourne with a grand opening attended by Delcam Chairman, Peter Miles, on 7th February.

Delcam's PartMaker offers free viewer for data sharing

Mon, 11 Feb 2013 00:00:00 GMT

Delcam�s PartMaker Division has launched a new, free utility called PartMaker Viewer.

Delcam Polska opens third office in Bydgoszcz

Fri, 8 Feb 2013 00:00:00 GMT

Delcam�s subsidiary in Poland, Delcam Polska, has opened a third office in Bydgoszcz to support further growth in sales of the company�s CADCAM software in the country.

Delcam to show latest DentMILL dental milling software in China

Thu, 7 Feb 2013 00:00:00 GMT

The latest release of Delcam�s DentMILL software for the milling of dental implant restorations will be demonstrated at the Dental South China Expo to be held in Guangzhou, China, from 27th February to 2nd March.

Delcam's Clive Martell named CEO of the Year

Wed, 6 Feb 2013 00:00:00 GMT

Delcam�s Chief Executive, Clive Martell, was named CEO of the Year at the Grant Thornton Quoted Company Awards, sponsored by Growth Company Investor.

Delcam supports all leading EDM equipment with integrated electrode solution

Tue, 5 Feb 2013 00:00:00 GMT

Delcam has extended the range of EDM equipment supported by its integrated solution for the design, machining and inspection of electrodes.

Delcam's Sales Partner Meeting celebrates another record year

Mon, 4 Feb 2013 00:00:00 GMT

More than 280 delegates from Delcam�s international sales network attended the company�s 2013 Sales Partner Meeting held at the St.

Delcam to show robot machining developments at JEC

Thu, 31 Jan 2013 00:00:00 GMT

Delcam will demonstrate the latest developments in its PowerMILL software for the programming of machining by robot at the JEC exhibition to be held in Paris from 12th to 14th March.

Delcam's new ArtCAM Pro for complex artistic designs on show at ISA

Wed, 30 Jan 2013 00:00:00 GMT

Delcam will demonstrate the latest version of its ArtCAM Pro software for design and manufacturing of 3D signage on booth #2927 at Sign Expo 2013 to be held at the Mandalay Bay Convention Center in Las Vegas from 4th to 6th April.

Delcam welcomes Canadian High Commissioner to Birmingham

Thu, 24 Jan 2013 00:00:00 GMT

Delcam hosted a visit to its Birmingham headquarters by the Canadian High Commissioner, Gordon Campbell, on 17th January.

Delcam improves PowerSHAPE solid modelling and point cloud tools

Wed, 23 Jan 2013 00:00:00 GMT

Delcam has launched the 2013 R2 version of its PowerSHAPE CAD software family with new tools and enhancements for solid modelling and for manipulating point clouds.

Delcam to show orthotics CADCAM software and scanner at ISPO

Tue, 22 Jan 2013 00:00:00 GMT

Delcam will demonstrate the latest versions of its software for the design and manufacture of custom orthotic insoles, plus its iQube foot scanner for the collection of patient data, at the International Society for Prosthetics and Orthotics World Congress to be held in Hyderabad, India, from 4th to 7th February.

Delcam to show latest in CAD and CAM at AeroDef

Fri, 18 Jan 2013 00:00:00 GMT

Delcam will demonstrate the 2013 releases of its complete CADCAM software for the design, manufacturing and inspection of aerospace and defense parts at SME�S AeroDef Manufacturing Conference, to be held at the Long Beach Convention Center from 19th to 21st March.

Delcam to launch new software for accommodative orthotics at AAOP meeting

Thu, 17 Jan 2013 00:00:00 GMT

Delcam will demonstrate the latest version of its OrthoMODEL design and manufacturing software for custom orthotic insoles at the 2013 Academy Annual Meeting & Scientific Symposium to be held at the Caribe Royal Resort in Orlando, Florida, on 22nd and 23rd February.

Delcam CRISPIN expands sales team with new Marketing Executive

Tue, 15 Jan 2013 00:00:00 GMT

Delcam CRISPIN, the world�s largest supplier of CADCAM software to the footwear industry, has expanded its sales team with the appointment of Ian Evans as Marketing Executive.

Delcam UK achieves record sales of software/maintenance

Mon, 14 Jan 2013 00:00:00 GMT

Further evidence of the growing resurgence in UK manufacturing comes with the news that Delcam�s UK Division last year achieved its highest sales of software and maintenance since the company�s UK business was converted into a separate trading division in 1996.

Delcam partners on new machining method for �fir-tree� profiles

Thu, 10 Jan 2013 00:00:00 GMT

Delcam is working with Iruba, a German provider of engineered solutions, and machine-tool manufacturer Hermle to develop a novel five-axis machining method, programmed with the PowerMILL CAM system, for the creation of "fir-tree� profiles in components for turbo machinery.

Delcam to show latest engraving software at World Money Show

Wed, 9 Jan 2013 00:00:00 GMT

Delcam will demonstrate the latest version of its ArtCAM Pro engraving software at the World Money Fair to be held in Berlin, Germany, from 1st to 3rd February.

Delcam to show latest DentMILL dental milling software at Lab Day Chicago

Tue, 8 Jan 2013 00:00:00 GMT

Delcam will demonstrate the latest release of its DentMILL software for the milling of dental implant restorations at the Lab Day Chicago meeting to be held on February 22nd and 23rd.

Delcam to promote Healthcare Division on UKTI Mission to India

Mon, 7 Jan 2013 00:00:00 GMT

CADCAM developer Delcam will promote the software and services available from its Healthcare Division during a UKTI Health Sector Mission to India from 14th to 19th January.

Delcam achieves record orders in December

Thu, 3 Jan 2013 00:00:00 GMT

Birmingham-based CADCAM developer Delcam is pleased to announce that, in line with the trading update made on 18 December 2012, it achieved a new one-month record in December 2012 for orders of software licences and maintenance contracts.

Delcam to show 2013 releases of CAM products at Houstex 2013

Wed, 2 Jan 2013 00:00:00 GMT

Delcam will demonstrate the 2013 releases of its PowerMILL, FeatureCAM and PartMaker CAM systems on booth 1234 at Houstex at the George R, Brown Convention Center in Houston, Texas, from 26th to 28th February.

Hankook Delcam wins Award for Excellence in Sustainability Management

Thu, 20 Dec 2012 00:00:00 GMT

Last month, Hankook Delcam, Delcam�s Joint Venture in South Korea, won the award for Excellence in Sustainability Management at the Corporate Sustainability Management Awards held by the South Korean Ministry of Knowledge and Economy and co-sponsored by the country�s Small and Medium Business Administrator.

PartMaker announces Road Show to promote 2013 release

Wed, 19 Dec 2012 00:00:00 GMT

Delcam�s PartMaker Division will host a nine-city tour across the USA, starting in January, to educate customers and prospective users on the new technology available in the new 2013 software release.

FoFdation project partners, Artis and Delcam, start machining trials

Tue, 18 Dec 2012 00:00:00 GMT

German FoFdation partner Artis visited Delcam in Birmingham for three days at the end of November to install, and to train staff on using, process monitoring equipment on one of the CNC machines inside Delcam�s Advanced Manufacturing Facility.

SECO to sponsor Delcam's international student CAM competition

Mon, 17 Dec 2012 00:00:00 GMT

Delcam is pleased to announce that cutting-tool supplier, Seco, is to sponsor the company�s first international student CAM competition.

Delcam launches new CADCAM software for accommodative orthotics

Fri, 14 Dec 2012 00:00:00 GMT

Delcam has launched a new version of its design software for custom orthotic insoles developed specifically for accommodative orthotics.

Delcam adds multilingual learning zone for latest PowerINSPECT

Wed, 12 Dec 2012 00:00:00 GMT

Delcam has enhanced its multi-lingual learning zone within the Delcam.

Delcam's 2013 PartMaker CAM includes new machining module

Tue, 11 Dec 2012 00:00:00 GMT

Delcam has launched the 2013 version of its PartMaker CAM software for the programming of production-machining equipment such as turn-mill centres, bar-fed mills and Swiss-type lathes.

Delcam's new ArtCAM Pro makes complex artistic designs easy

Thu, 6 Dec 2012 00:00:00 GMT

The new release of Delcam�s ArtCAM Pro CADCAM software for artistic applications has made it much easier to create complex designs, especially those that include repeated elements that are similar but not identical within the design.

Delcam adds OrthoticSelector to software range for custom insoles

Tue, 4 Dec 2012 00:00:00 GMT

Delcam has added a new program, OrthoticSelector, to its range of software for the design and manufacture of custom orthotic insoles.

Delcam extends 20-year partnership with Autovaz during Ministerial visit

Mon, 3 Dec 2012 00:00:00 GMT

Delcam has extended its 20-year partnership with Russian automotive manufacturer, AutoVAZ, with an agreement covering support and maintenance for the coming year.

Delcam programs used for turbo milling demonstrations

Fri, 30 Nov 2012 00:00:00 GMT

Delcam�s PowerMILL software for five-axis machining is being used to program a novel machining method for the creation of "fir-tree� profiles in components for turbo machinery.

Delcam CRISPIN shows latest footwear software to Chinese users

Fri, 30 Nov 2012 00:00:00 GMT

Delcam CRISPIN presented the latest developments in its range of software for footwear design and manufacture to more than 250 customers at its latest user meeting in Quanzhou, China, last week.

Delcam's PowerMILL enables five-axis machining at Golden Era

Thu, 29 Nov 2012 00:00:00 GMT

Adding a five-axis DMS CNC router programmed with Delcam�s PowerMILL CAM system for five-axis machining has made it possible for film and events company, Golden Era Productions, to produce sets and props as big as ten feet by five feet by four feet in a single set-up, even when the pieces include complex, highly-detailed 3D surfaces.

Delcam GmbH hosts successful user meetings

Wed, 28 Nov 2012 00:00:00 GMT

Delcam GmbH hosted a series of user meetings in Niedernhausen (near Wiesbaden) between 15th and 17th October.

Delcam forms new subsidiary for Australia and New Zealand

Fri, 23 Nov 2012 00:00:00 GMT

Delcam is pleased to announce that it has converted the software division of its Australian reseller Camplex into a wholly-owned subsidiary, Delcam Australia, covering the sales and support of Delcam software products in Australia.

Free CAD data translation from Delcam

Thu, 22 Nov 2012 00:00:00 GMT

Delcam is offering free use of its online CAD data-exchange service, Delcam Exchange, from 21st to 26th November.

Delcam India to show Vortex high-speed roughing at IMTEX

Tue, 20 Nov 2012 00:00:00 GMT

Delcam India will demonstrate the new Vortex strategy for high-speed area clearance on at the IMTEX 2013 machine-tool exhibition to be held in Bangalore from 24th to 30th January.

Delcam CADCAM used for machining of laser-sintered metal

Fri, 16 Nov 2012 00:00:00 GMT

Additive manufacturing and machining are usually regarded as competing processes.

FoFdation consortium partners gather for progress update

Thu, 15 Nov 2012 00:00:00 GMT

Jan Willem Gunnink, Manager of Research & Development Projects in Europe for Delcam, and four other colleagues from the company joined the consortium partners of the FoFdation project at ECN in Nantes, France, from 16th-19th October 2012 to share results and update everyone on the progress made so far towards achieving the project objectives.

Delcam to show latest in CADCAM for toolmakers in Indonesia

Wed, 14 Nov 2012 00:00:00 GMT

Delcam Indonesia will demonstrate the 2013 releases of Delcam�s PowerSHAPE CAD software, PowerMILL CAM system and PowerINSPECT inspection software at the Manufacturing Indonesia exhibition to be held in Jakarta from 5th to 8th December.

Delcam to show latest DentMILL dental milling software in California

Mon, 12 Nov 2012 00:00:00 GMT

Delcam will show the latest version of its DentMILL software for the milling of dental implant restorations at the Dental Laboratory Owners Association of California CAD/CAM Expo and Symposium to be held in Anaheim from 16th to 18th November.

Delcam supports move to larger and more complex parts at dalau

Fri, 9 Nov 2012 00:00:00 GMT

In a move to enable the company to machine larger and more complex plastic parts to high levels of precision, dalau has added a new DMG machine, programmed with Delcam�s FeatureCAM feature-based CAM system, and a Hexagon inspection arm using PowerINSPECT inspection software.

Delcam to show latest in CAD and CAM at Southern Manufacturing

Thu, 8 Nov 2012 00:00:00 GMT

Delcam will demonstrate the 2013 releases of its PowerSHAPE CAD software and PowerMILL CAM system at the Southern Manufacturing exhibition to be held in Farnborough on 13th and 14th February.

Delcam adds probing capabilities to FeatureCAM

Mon, 5 Nov 2012 00:00:00 GMT

Delcam has added new probing capabilities in the 2013 version of its FeatureCAM feature-based CAM software.

Delcam to show design, machining and inspection developments at Autosport

Fri, 2 Nov 2012 00:00:00 GMT

Delcam will demonstrate the latest developments for the motorsport industry in its design, machining and inspection software at the Autosport Engineering exhibition to be held at the NEC, Birmingham, on 10th and 11th January.

Delcam adds new website for PowerSHAPE CAD software

Thu, 1 Nov 2012 00:00:00 GMT

Delcam has launched a new website for its PowerSHAPE CAD system �

BTU University hosts meeting for COMET robot machining project

Mon, 8 Oct 2012 00:00:00 GMT

Consortium members of the COMET project on machining with robots gathered for the 7th General Assembly meeting at the striking BTU University Library, Cottbus, Germany from 26th � 28th September 2012.

Delcam launches integrated electrode solution

Mon, 8 Oct 2012 00:00:00 GMT

Delcam has launched a completely integrated solution for the design, machining and inspection of electrodes.

Delcam reseller CCSI adds FeatureCAM sessions to annual update day

Fri, 5 Oct 2012 00:00:00 GMT

CADCAM Systems Inc, Delcam�s reseller for Illinois and Iowa, will hold its next annual customer update seminar at Ingersoll Cutting Tools in Rockford on October 11th.

Delcam holds first Asian Technical Summit in Indonesia

Thu, 4 Oct 2012 00:00:00 GMT

Delcam held its Asian Technical Summit in Indonesia for the first time last month, presenting its latest technical and financial news to customers, academicians and the technical media from the region.

Delcam forms Joint Venture in Denmark

Thu, 4 Oct 2012 00:00:00 GMT

Delcam has established a new Joint Venture company in Denmark, Delcam Danmark, in partnership with local CADCAM specialist S�ren Friis, who will be the Director of the new company.

Delcam launches Delcam for SolidWorks 2013

Wed, 3 Oct 2012 00:00:00 GMT

Delcam has launched the 2013 version of Delcam for SolidWorks, the integrated CAM system for SolidWorks.

Delcam Taiwan celebrates 20th anniversary with record user meeting

Wed, 3 Oct 2012 00:00:00 GMT

Delcam Taiwan celebrated its 20th anniversary in Taipei last month with a record attendance at its commemorative user meeting of over 240 delegates.

Delcam offers Weta Workshop fantastic software for fantastic projects

Mon, 1 Oct 2012 00:00:00 GMT

Many users of Delcam software claim to be able to produce anything that their customers� need.

Delcam celebrates record visitor numbers at IMTS

Wed, 26 Sep 2012 00:00:00 GMT

Delcam completed a hugely successful week in Chicago at the recent IMTS exhibition with record numbers of visitors to its booth.

Delcam CRISPIN to show new footwear software at SIMAC

Tue, 25 Sep 2012 00:00:00 GMT

Delcam CRISPIN will preview the 2013 versions of its ShoeMaker concept design and Engineer Pro pattern development and grading software for the footwear industry at the SIMAC exhibition to be held in Bologna, Italy, from 9th to 11th October.

Delcam to show new DentMILL dental milling software at Dentech China

Mon, 24 Sep 2012 00:00:00 GMT

Delcam will show the latest version of its DentMILL software for the milling of dental implant restorations at the Dentech China exhibition to be held in Shanghai from 26th to 29th October.

Delcam to show integrated electrode solution at Euromold

Thu, 20 Sep 2012 00:00:00 GMT

Delcam will demonstrate its completely integrated solution for the design, machining and inspection of electrodes on stand H57 in Hall 8 at the Euromold exhibition to be held in Frankfurt from 27th to 30th November.

Delcam adds more milling options for FeatureCAM

Wed, 19 Sep 2012 00:00:00 GMT

Delcam has added a new series of options for three-axis milling and enhancements in five-axis machining to its FeatureCAM feature-based CAM software.

Delcam Japan to show latest in CAD and CAM at JIMTOF

Fri, 14 Sep 2012 00:00:00 GMT

Delcam Japan will demonstrate the 2013 releases of Delcam�s PowerSHAPE CAD software and PowerMILL CAM system at the JIMTOF exhibition to be held in Tokyo from 1st to 6th November.

Delcam adds 40,000th customer � Lifetime Products Inc

Thu, 13 Sep 2012 00:00:00 GMT

Delcam is pleased to announce that the company recently added its 40,000th customer � Lifetime Products Inc.

Delcam launches new DentMILL dental milling software

Wed, 12 Sep 2012 00:00:00 GMT

Delcam has launched a major upgrade to its DentMILL software for the milling of dental implant restorations.

Delcam UK expands offices

Tue, 11 Sep 2012 00:00:00 GMT

Delcam UK has moved into larger offices within its parent company�s Birmingham headquarters.

Delcam Polska opens second office in Katowice

Mon, 10 Sep 2012 00:00:00 GMT

Delcam�s subsidiary in Poland, Delcam Polska, has opened a second office in Katowice to support further growth in sales of the company�s CADCAM software in the country.

Delcam to show how ArtCAM Pro makes complex designs easy at W12

Fri, 7 Sep 2012 00:00:00 GMT

Delcam will preview the latest version of its ArtCAM Pro design and manufacturing software for woodworking applications on stand 6A 234 at the W12 exhibition to be held at the NEC, Birmingham, from 7th to 10th October.

More than 90% of customers would recommend Delcam

Thu, 6 Sep 2012 00:00:00 GMT

In a recent survey of Delcam�s UK customers, more than 90% of respondents replied that they would definitely recommend, or that they were likely to recommend, other companies to buy CADCAM systems from Delcam.

Delcam Italia to show complete CAM range at BIMU

Tue, 4 Sep 2012 00:00:00 GMT

Delcam Italia will demonstrate Delcam�s complete range of CAM software at the BIMU exhibition to be held in Milan from 6th to 10th October.

Delcam's latest PowerINSPECT inspection software at Make Measurement Matter

Mon, 3 Sep 2012 00:00:00 GMT

Delcam will demonstrate the 2012 R2 version of its PowerINSPECT inspection software at the GTMA Make Measurement Matter event to be held at the Centre for Engineering and Manufacturing Excellence in Rainham, Essex, on 17th October.

Delcam to preview new orthotics CADCAM software at AOPA

Fri, 31 Aug 2012 00:00:00 GMT

Delcam will preview a new version of its design software for custom orthotic insoles developed specifically for accommodative orthotics on booth 908 at the AOPA Annual Meeting to be held in Boston from 6th to 9th September.

Delcam to host fifth GTMA Emerging Technologies event

Fri, 31 Aug 2012 00:00:00 GMT

Delcam will host the fifth GTMA 'Emerging Technologies' event at its Birmingham headquarters on Wednesday 19th September.

Delcam to show how ArtCAM Pro makes engraving designs easy at IMTS

Thu, 30 Aug 2012 00:00:00 GMT

Delcam will preview the latest version of its ArtCAM Pro design and manufacturing software for engraving and other artistic metalworking applications on booth E-3222 at the IMTS exhibition to be held in Chicago from 10th to 15th September.

Delcam to show latest in CADCAM at Advanced Engineering events

Thu, 30 Aug 2012 00:00:00 GMT

Delcam will demonstrate new versions of its design, machining and inspection software at the Advanced Engineering group of events to be held at the NEC, Birmingham, on 7th and 8th November.

Delcam adds over 20 students to Birmingham staff

Wed, 29 Aug 2012 00:00:00 GMT

CADCAM developer Delcam has added more than 20 students to the staff at its Birmingham headquarters in the last few months.

Delcam announces over 50 partner stands at IMTS

Tue, 28 Aug 2012 00:00:00 GMT

As befits its position as the world�s leading specialist supplier of machining software and services, Delcam works with more manufacturing partners than any other CAM software developer.

Delcam to highlight integrated machining and inspection at ILA Berlin

Fri, 24 Aug 2012 00:00:00 GMT

Delcam will highlight the ways in which machining and inspection can be integrated more closely on the Midlands Aerospace Alliance stand at the ILA Berlin Air Show.

Delcam achieves record half-year sales

Thu, 23 Aug 2012 00:00:00 GMT

CADCAM developer Delcam is pleased to announce that the company achieved record sales for a six-month period during the first half of 2012.

Delcam CRISPIN launches Learning Zone for footwear CADCAM

Wed, 22 Aug 2012 00:00:00 GMT

Delcam CRISPIN has introduced a Learning Zone within its

FoFdation project progress presented at CIRP Conference

Thu, 26 Jul 2012 00:00:00 GMT

A session on the FoFdation project (Foundation for the Factory of the Future) was included in the 8th CIRP Conference on Intelligent Computation in Manufacturing Engineering held in Ischia, Gulf of Naples, Italy, from 16th to 20th July.

Delcam to show integrated electrode solution at IMTS

Wed, 25 Jul 2012 00:00:00 GMT

Delcam will demonstrate its completely integrated solution for the design, machining and inspection of electrodes on booth E-3222 at the IMTS exhibition to be held in Chicago from 10th to 15th September.

Delcam adds CADCAM veteran for FeatureCAM sales in Michigan

Tue, 24 Jul 2012 00:00:00 GMT

Delcam has strengthened its USA sales team with the appointment of Arthur Schmidt as Sales Manager for the FeatureCAM feature-based CAM system in Michigan and northern Ohio.

Delcam to show latest Delcam for SolidWorks at IMTS

Mon, 23 Jul 2012 00:00:00 GMT

Delcam will launch the 2013 version of Delcam for SolidWorks, the integrated CAM system for SolidWorks, on booth E-3222 at the IMTS exhibition to be held in Chicago from 10th to 14th September.

Foreign Secretary William Hague visits Delcam at Farnborough Air Show

Fri, 20 Jul 2012 00:00:00 GMT

Foreign Secretary William Hague visited the Delcam booth at the Farnborough Air Show last week as part of a guided tour of the busy show halls.

Delcam rated world's leading CAM software specialist for 12th year

Thu, 19 Jul 2012 00:00:00 GMT

The latest NC Software Market Analysis Report from leading US analysts CIMdata shows that, in 2011, Delcam again had the highest vendor revenues and received the highest end-user payments of all the CAM-centric companies.

Living the dream with Delcam's FeatureCAM

Tue, 17 Jul 2012 00:00:00 GMT

Thanks to Delcam�s FeatureCAM feature-based CAM system, Jeremy Cupp, owner of LC Fabrications, is able to combine his two passions � motorcycles and machining � into a successful business.

Delcam's success in Asia featured by UKTI

Fri, 13 Jul 2012 00:00:00 GMT

Delcam, the Birmingham-based developer of CADCAM software, has been selected by the UK Trade and Investment Asia Task Force to be featured on the "Business in Asia� website as one of a series of case studies on UK companies that are having success in the region.

Delcam ensures Gardner Aerospace is quick off the mark

Thu, 12 Jul 2012 00:00:00 GMT

Speed is of the essence in the fast paced, competitive world of aerospace manufacturing, particularly when it comes to any maintenance or repair work relating to an aircraft being stuck on the ground waiting for an urgent replacement part to be manufactured.

Delcam to show probing in FeatureCAM at IMTS

Tue, 10 Jul 2012 00:00:00 GMT

Delcam will demonstrate new probing capabilities in the 2013 version of its FeatureCAM feature-based CAM software on booth E-3222 at the IMTS exhibition to be held in Chicago from 10th to 15th September.

Delcam reseller Les Technologies increases customer support

Thu, 5 Jul 2012 00:00:00 GMT

Delcam�s reseller for the French-speaking part of Canada, Les Technologies, has increased the technical support for its customers with the appointment of Pasqual Desjardins as an additional application engineer.

Delcam's new PowerSHAPE CAD enhances direct modelling and reverse engineering

Wed, 4 Jul 2012 00:00:00 GMT

The 2013 release of Delcam�s PowerSHAPE CAD system includes enhancements to its direct modelling and reverse engineering capabilities that will make the software both more flexible and even easier to use.

Delcam's ArtCAM cuts ice carving projects to a fraction of the time

Mon, 2 Jul 2012 00:00:00 GMT

"Delcam�s ArtCAM Pro software helps us deliver a more consistent product in a fraction of the time required in the past,� claims Sam Bayley, Production and Plant Manager at Iceculture Inc.

Delcam tastes success at Hermle Open House

Fri, 29 Jun 2012 00:00:00 GMT

Delcam continued its close relationship with Hermle at the Open House held recently at the company�s headquarters in Gosheim.

Delcam updates Solid Doctor for CAD data repair

Thu, 28 Jun 2012 00:00:00 GMT

The 2013 release of Delcam�s PowerSHAPE CAD software, which is due for release next month, will include a major upgrade to the Solid Doctor module for data repair.